Skip to main content

Eastern Properties Group

EPG GUIDES

How to Winterize Plumbing in a Vacant Maryland Rental

By Eastern Properties Group, Cumberland, Maryland
Row of brick rowhouses on a tree-lined street

To winterize the plumbing in a vacant Maryland rental, do one of two things before the first hard freeze: keep the heat on at 55 degrees or higher, or have a licensed plumber drain the whole system. Heat off with the water still on is the one choice that does not work, because pipes freeze and burst with nobody there to see it.

This page is the short version for owners of empty homes. The steps below cover both choices, in the order to do them.

The steps

  1. Call your insurance agent and ask in writing what your policy requires for a vacant home. Many policies limit water damage cover after a set number of empty days, and the number differs by policy.
  2. Choose heat on or drained. Keep the heat on if the home is listed, being shown, or will have a tenant within a few weeks. Drain the system only if the home will sit empty for months and nobody will show it.
  3. If you keep the heat on, have the furnace or boiler serviced, set the thermostat to 55 degrees or higher, and put in fresh batteries.
  4. Find the main water shut-off, make sure it turns, and tag it. Write down where it is for whoever checks the home.
  5. Disconnect garden hoses from outside spigots, and shut off any outdoor valve from inside.
  6. Open the cabinet doors under kitchen and bathroom sinks on outside walls, so warm air reaches the pipes.
  7. If you drain the system, hire a licensed plumber. The main valve is closed, every faucet is opened, the water heater is emptied, toilets are flushed and their tanks and bowls drained, and plumbing antifreeze goes in the traps. Ask for a written note of what was drained.
  8. Check the home on a schedule through the winter. Look at the thermostat, under sinks and around the water heater for water, and at the windows and doors. Write down the date and what you found.

A boiler or radiator system holds water too. A licensed contractor needs to drain it or fill it with the right antifreeze. Never put car antifreeze in a home’s plumbing.

Heat on or drained

Keeping the heat on is the simpler choice, and it is the right one for most homes between tenants. A drained home has to be refilled and tested before anyone can live there, so plan for that before you list it. The Cumberland rental inspection also expects the utilities to be on, which is one more reason to keep the water and heat on in a home you want to rent soon.

Common questions

What temperature should a vacant rental be kept at in winter?

No lower than 55 degrees. Check your insurance policy too, because your insurer may ask for a specific setting.

Can I turn the heat off in an empty rental to save money?

Only if a licensed plumber has drained the plumbing. Heat off with the water on is how pipes freeze and burst.

Who should drain the plumbing in a vacant rental?

A licensed plumber. They know every fixture, trap and tank in the home, and you get a written record for your insurer.

Own an empty rental in Maryland?

Get a Free Rental Analysis and we will tell you what the home should rent for. Free rental analysis, back within 3 to 5 business days. No obligation.

Call (240) 916-6008 or email [email protected]. Office hours are 9:00 to 4:00, Monday to Friday.

Get a Free Rental Analysis

For the full fall checklist, who should check the home, and what to do if a pipe bursts, read Winterizing Vacant Rentals in Western Maryland: An Owner’s Checklist.

This guide is general information for Maryland landlords, not legal advice. Rules change, so check the source links or ask us to check your property during a free rental analysis.

Own a rental in Maryland?

Find out what it should rent for and what it needs before a tenant moves in. Free, back within 3 to 5 business days.